PC & Mobile

USB WiFi not working with 100417CF Access Violation error

While utilizing a USB WiFi dongle should you obtain a 100417CF Access Violation error, then this publish might be ready that will help you. You can comply with some easy steps to repair this error. The full error message reads:

Access violation at deal with 100417CF in module ‘RaWLAPILdll”. Read of address 00000000.

What causes USB WiFi 100417CF Access Violation error?

This error usually occurs due to faulty USB dongles, outdated drivers, disk errors, corrupt network settings, misconfigured settings or if the access is blocked by Firewall.

Fix USB WiFi not working with 100417CF Access Violation error

If you receive Access violation at address 100417CF error while using a USB WiFi dongle on your Windows PC, follow these suggestions to resolve the issue:

  1. Run the Network Adapter Troubleshooter
  2. Restart the WLAN Autoconfig Service
  3. Update the Network Drivers
  4. Modify Power Saving Options
  5. Run these Network Commands
  6. Run ChkDsk
  7. Reset Network Settings

Now let us see these in detail.

1] Run the Network Adapter Troubleshooter

Run Network Adapter troubleshooter

Before getting started with different troubleshooting methods to fix this issue, try running Microsoft’s Automated Troubleshooting Services as a primary step to diagnose and restore widespread Network points. Here’s how:

  1. Press the Windows key + I to open Settings.
  2. Scroll down and click on on Troubleshoot > Other Troubleshooters.
  3. Click on Run beside Network Adapter and comply with the directions on-screen.

2] Restart the WLAN Autoconfig Service

Restart WLAN service

The WLAN AutoConfig service selects the wi-fi networks the pc will routinely connect with. This incorporates routinely deciding on and connecting to a extra most well-liked wi-fi community when one turns into out there. Restarting this service will help repair USB community adapter-related points. Here is how you are able to do it:

  1. Press the Windows key + R to open the Run dialog field.
  2. Type companies.msc and hit Enter.
  3. Scroll down and seek for WLAN AutoConfig.
  4. Right-click on the service and choose Restart.
  5. Once carried out, restart your machine and verify if the problem is fastened.

3] Update the Network Drivers

Outdated or corrupted community drivers can generally additionally trigger errors with the USB WiFi Adapter. Consider updating the community drivers to repair this subject. Here is how one can replace the Network Drivers of your machine.

4] Modify Power Saving Options

Modify Power Saving Options

The power-saving settings can generally disable the USB ports of your PC to lower energy consumption. Modifying these settings will help repair the USB entry violation error. Here’s how:

  1. Click on Start and seek for Device Manager.
  2. Expand the choice Universal Serial Bus Controllers.
  3. Right-click in your USB WiFi Adapter and choose Properties.
  4. In the Properties window, navigate to the Power Management tab.
  5. Now uncheck the choice Allow the pc to show off this machine to save lots of energy.
  6. Click on Ok to save lots of the modifications.

5] Run these Network Commands

Running the community instructions will reset the TCP/IP stack, renew the IP deal with, Reset Winsock and flush the DNS consumer resolver cache. Here’s how you are able to do it:

  • Press the Windows key, seek for Command Prompt, and choose Run as Administrator.
  • Type the next instructions one after the other and hit Enter.
    netsh winsock reset 
    netsh int IP reset 
    ipconfig /launch 
    ipconfig /renew 
    ipconfig /flushdns

  • Restart your machine as soon as carried out.

6] Run ChkDsk

Run the command line ChkDsk and restart your laptop after which strive once more.

 

7] Reset Network Settings

reset network setting

If none of those steps had been ready that will help you, reset the community settings of your machine. Performing a community reset will take away after which reinstall all of your community adaptors. It can even reset all associated settings to their defaults. Here is how you are able to do it:

  1. Press the Windows key + I to open Settings.
  2. Navigate to Network & Internet > Advanced community settings > Network Reset.
  3. Click on Reset Now beside Network Reset and comply with the directions on-screen.

Fix: TP-Link WN821N WiFi adapter not working or detecting networks

How do I repair the WiFi adapter on Windows?

The WLAN AutoConfig service selects the wi-fi networks the pc will routinely connect with. This incorporates routinely deciding on and connecting to a extra most well-liked wi-fi community when one turns into out there. Restarting this service will help repair USB community adapter-related points.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button