PC & Mobile

Fix Encoding overloaded issue in OBS Studio

Are you experiencing the “Encoding overloaded” issue whereas attempting to stream or report movies with OBS Studio? OBS which stands for Open Broadcaster Software is without doubt one of the hottest free and open-source dwell streaming and sport and video recording software program. Lots of OBS customers have complained about going through the Encoding overloaded issue whereas streaming. When occurred, you’ll get the next error message:

Encoding overloaded! Consider turning down video settings or utilizing a quicker encoding preset.

If you’re questioning why are you getting this error message, the reply is because of a CPU bottleneck. The excessive CPU utilization of OBS Studio that your system is unable to deal with is the first motive for this error message. Now, OBS Studio having a excessive CPU utilization is primarily induced due to larger output video settings.

Here are a number of the causes for the “Encoding overloaded” issue on OBS:

  • If your output decision is about very excessive, it is going to trigger excessive CPU utilization of OBS.
  • Another motive for a similar is choosing the next framerate than 30 fps for the output video.
  • Choosing a slower encoder preset that provides high-quality video however consumes even excessive CPU utilization can be chargeable for this error message.
  • If you don’t have sufficient disk house to render and save output movies, you’re prone to expertise this error message.
  • In case you will have enabled the Game Mode function, your PC will likely be optimized for gaming and OBS won’t have sufficient system sources to course of.
  • Your {hardware} is just too weak to deal with demanding apps like OBS Studio.
  • If there are too many apps operating in the background, OBS won’t have sufficient system sources and thus, you get this message.
  • Overlay apps and different conflicting apps can even trigger this issue.

Fix Encoding overloaded issue in OBS Studio

Here are the fixes you need to use to repair the “Encoding overloaded” issue in OBS Studio in your Windows PC:

  1. Decrease the output decision.
  2. Adjust your body fee.
  3. Change the encoder preset.
  4. Use {hardware} encoding.
  5. Change OBS precedence in Task Manager.
  6. Check the recording supply.
  7. End conflicting packages utilizing Task Manager.
  8. Free up some disk house.
  9. Turn off Game Mode.
  10. Use a substitute for OBS.

1] Decrease the output decision

The very first thing it’s best to do to repair the issue is decreasing your output decision. If you will have chosen the next decision to stream gameplay or display video, it is going to eat excessive CPU utilization that your system can’t take. And thus, you get the “Encoding overloaded” issue in OBS.

Now, you may want a high-quality video however your CPU won’t be capable to deal with it for the time being. Hence, if the state of affairs is relevant, all that you must do is lower the output decision in your video settings on OBS and see if the issue is mounted. Here’s how you are able to do that:

  1. First, open OBS Studio and go to the File > Settings choice or press the Settings button from the underside proper aspect of your display.
  2. Now, go to the Video tab in Settings and click on on the Output (Scaled) Resolution drop-down choice.
  3. Next, choose a decrease decision than the present one. You can play with this setting and see which decision works properly for you.
  4. Once performed, press the Apply > OK button and restart your pc.
  5. Finally, relaunch OBS and see if the issue is resolved or not.

If you continue to get the “Encoding overloaded” warning in OBS, you may comply with the subsequent repair.

2] Adjust your body fee

Frame fee is outlined by the variety of frames captured and displayed per second in a video. Choosing the next body fee is prone to overload your CPU and GPU and trigger the issue at hand. So, you may attempt decreasing your body fee and setting it beneath 30 FPS,  after which examine if the issue is gone. Here’s how you are able to do that:

  1. First, open OBS Studio and click on on the File > Settings choice.
  2. Now, transfer to the Video tab and click on on the Common FPS Values drop-down button.
  3. From the accessible body fee values, choose a worth lower than 30.
  4. Finally, click on on Apply > OK and relaunch OBS. Launch your stream after which see if the issue is gone or not.

If your body fee is just not the issue, go forward and check out the subsequent potential repair.

See: Fix OBS Game seize black display on Windows

3] Change the encoder preset

OBS makes use of the x264 video encoder by default. Now, it has a number of presets that you need to use for encoding a video. These presets are totally different in phrases of video high quality and CPU utilization. The “fast” encoder preset has a excessive CPU consumption and produces high-quality video, whereas the “ultrafast” preset consumes low CPU utilization however offers a decrease video high quality. If you will have chosen a slower preset than the remaining like quick, it is going to have larger CPU utilization which may outcome in the “Encoding overloaded” warning. Hence, select a quicker encoder preset to repair the issue. You can choose the “veryfast” encoder preset that has medium CPU utilization and provides customary video high quality.

Here are the steps to alter the encoder preset in OBS:

  1. First, launch OBS and open its File > Settings.
  2. Now, transfer to the Output tab from ht left-side panel and click on on the Encoder preset drop-down button.
  3. Next, choose a quicker preset like veryfast, quicker, or superfast encoder preset.
  4. After that, press Apply > OK to save lots of adjustments after which relaunch OBS to examine if the issue is resolved.

If you continue to get the identical error message, transfer on to the subsequent resolution.

4] Use {hardware} encoding

To decrease CPU utilization, you need to use a {hardware} encoder like Quicksync (Intel Integrated GPUs), AMF (newer AMD GPUs), or NVENC (newest Nvidia GPUs). However, these {hardware} encoders give decrease video high quality but in addition put much less stress in your CPU. Hence, it is strongly recommended to make use of an acceptable {hardware} encoder from these. Here are the steps to alter the {hardware} encoder in OBS:

  1. First, begin OBS and go to Files > Settings.
  2. Now, go to the Output tab and set Encoder to Hardware. For instance, as mine is an Intel GPU, I may choose Quicksync {hardware} encoder.
  3. Lastly, faucet on Apply > OK after which restart OBS to examine whether or not the “Encoding overloaded” warning has stopped or not.

Read: OBS not capturing Game Video on Windows PC.

5] Change OBS precedence in Task Manager

The subsequent factor it’s best to do is about the precedence of the OBS course of in Task Manager to Above Normal or High. This is as a result of the CPU works on process priorities. If there are a number of processes and duties operating in the background, OBS won’t be capable to make the most of your system sources because it requires. Thus, consequently, you get the “Encoding overloaded” warning. Hence, that you must change the precedence of OBS accordingly after which see if the issue is mounted or not.

Here are the steps to take action:

  1. First, press Ctrl + Shift + Esc to open Task Manager.
  2. Now, from the Processes tab, right-click on OBS Studio and choose the Go to particulars choice.
  3. After that, in the Details tab, right-click on the obs64.exe course of and choose the Set precedence as Above Normal or High.
  4. Finally, open OSB and examine if the issue is resolved or not.

6] Check the recording supply

Your recording supply like webcams and seize playing cards could be consuming a whole lot of CPU utilization which is why you’re getting the issue at hand. Hence, examine your recording supply and ensure it’s configured accordingly.

If you’re utilizing a webcam, be sure that it’s not configured to run at the next decision, akin to greater than 480p. For Logitech C920 customers, you would possibly face the issue at hand if you’re operating it at 1080p decision.

7] End conflicting packages utilizing Task Manager

There could be some conflicting packages operating in the background which might be inflicting the issue at hand. Overlay apps like Discord and NVIDIA Overlay are identified to trigger such points. Hence, shut all such packages utilizing the Task Manager after which see if the issue is resolved. If not, you may transfer on to the subsequent potential repair.

You may additionally like to take a look at: OBS Display Capture not working correctly on Windows

8] Free up some disk house

The OBS Studio utility requires cupboard space to jot down some information together with the output video recordings. If you retain getting the “Encoding overloaded” message in OBS, it could be the case that your disk is operating out of house required by the app. And consequently, you received’t be capable to stream your movies utilizing OBS. So, that you must release some disk house to repair the issue.

You can run Windows inbuilt device i.e., Disk Cleanup to make some house in your onerous drive. Here’s the best way to run it:

  1. First, open Disk Cleanup from the Startup menu.
  2. Now, choose the onerous drive the place you will have put in OBS Studio and press OK.
  3. Next, tick the form of information you wish to delete and press the OK button.

Apart from that, you can even delete your private information that you just don’t want anymore or transfer them to a distinct drive to make some house on the required drive.

If this technique works for you, nice. However, if the “Encoding overloaded” warning message nonetheless retains popping up, you may apply the subsequent repair.

9] Turn off Game Mode

High Performance OBS Studio

If you will have enabled Game Mode in your pc for optimizing gaming efficiency, it is going to go away fewer system sources for OBS Studio. And thus, you get the issue at hand. Hence, you may attempt disabling the Game Mode function on Windows 11/10. Here’s how to try this:

  1. First, open Settings utilizing Win+I and go to the Gaming tab.
  2. Now, click on on the Game Mode choice and disable the respective toggle.

Hopefully, the warning message “Encoding overloaded” will likely be stopped now.

Read: OBS recording stuttering, and freezes each few seconds on PC.

10] Use a substitute for OBS

If nothing else labored for you, the final choice is to make use of a substitute for OBS Studio. There are many free ones accessible on the web that you could obtain and set up for dwell streaming and to seize your gameplay. For instance, you need to use software program like XSplit Broadcaster, Lightstream Studio, or Streamlabs. These are widespread and good ones.

If you continue to wish to use OBS Studio, think about upgrading your {hardware}. This is as a result of your CPU could be too weak for getting the most effective efficiency from the OBS app and streaming high-quality movies. As a outcome, you retain getting the “Encoding overloaded” points. Also, whether it is too previous, you could exchange and improve your {hardware} for larger efficiency.

Read: Fix OBS Studio retains crashing on Windows PC.

How do I repair Encoding overloaded on OBS?

To repair the “Encoding overloaded” error message in OBS Studio, change your output configurations together with output decision, body fee, encoder preset, and so on., as they trigger excessive CPU utilization. Apart from that, you need to use a {hardware} encoder as a substitute of a software program encoder, set the precedence of OBS excessive, finish all of the conflicting background packages, disable the Game Mode function, and release some disk house. If the issue stays the identical, examine your recording supply and ensure it’s not operating on a too-high decision that causes excessive CPU utilization.

How do I cease OBS from utilizing a lot CPU?

To stop the OBS Studio app from having excessive CPU utilization, you’ll have to decrease your output decision and reduce the framerate as the upper these output configurations are the upper CPU utilization is. Apart from that, you can even change your encoding choices together with the encoding preset, and set it to a quicker preset that consumes low CPU utilization. You can even use a {hardware} encoder akin to Quicksync (Intel Integrated GPUs), AMF (newer AMD GPUs), or NVENC (newest Nvidia GPUs) to repair this downside.

Read: OBS Camera Not Showing up or Working.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button