PC & Mobile

Cannot find path C:AppxManifest.xml because it does not exist

If once you run the Add-AppxPackage command to reinstall, reset, or re-register an app in your Windows 11 or Windows 10 pc, and also you get an output stating Cannot find path C:AppxManifest.xml because it does not exist, then this submit is meant that can assist you. In this submit, we offer probably the most relevant options to this challenge.

You could encounter this error as a result of following essential causes.

  • Corrupt consumer account
  • Corrupted Microsoft Store app/cache
  • Incorrect or inadequate permissions for the WindowsApps folder

Cannot find path C:AppxManifest.xml because it does not exist

If you obtain the error message Cannot find path C:AppxManifest.xml because it does not exist once you attempt to reset or reinstall an app utilizing the Add-AppxPackage command in your Windows 11/10 system, you may apply any of the listed options beneath in no explicit order and see what works so that you can resolve the difficulty in your system.

  1. Initial guidelines
  2. Configure permissions on the WindowsApps folder
  3. Create a brand new User Account
  4. Reset/Re-register Microsoft Store
  5. Reset PC

Let’s see a short description of every of the options outlined above.

1] Initial guidelines

Before you proceed with the options beneath to resolve the Cannot find path C:AppxManifest.xml because it does not exist error you may have encountered in your pc, as a fast resolution, or somewhat workaround, supplied you do not have a particular desire operating the Add-AppxPackage PowerShell cmdlet, you would reset the app through Settings should you obtained the error whereas resetting the app. If you obtained the error whereas attempting to put in, reinstall re-register an app, you may get the app instantly from the Microsoft Store app after you have to have uninstalled the app because the case could also be. Another route you may go is to make use of the Winget command-line utility to obtain/set up apps from Microsoft Store in your Windows 11/10 system. In addition, you may run the Windows Store Apps Troubleshooter and see if that helps.

Read: PowerShell Get-Appxpackage Not working or Access Denied

2] Configure permissions on the WindowsApps folder

You’re prone to encounter the difficulty at hand if the consumer permissions of the WindowsApps folder are not correctly configured. In this case, to see if the difficulty shall be resolved you may assign full management permission to the WindowsApps folder or you may take possession of the folder. To carry out this process, do the next:

  • Press the Windows key + R to invoke the Run dialog.
  • In the Run dialog field, sort the setting variable beneath and hit Enter to open the Program Files listing.
%programfiles%
  • At the placement, right-click on the WindowsApps folder. If you don’t see the folder, you’ll want to indicate hidden information/folders.
  • Choose Properties from the context menu.
  • In the Properties sheet, click on the Security tab.
  • In the Security tab, on the backside, click on on the Advanced button.
  • In the Advanced Security Settings for WindowsApps window that opens, click on on the Change hyperlink for Owner.
  • In the Select User or Group dialog that pops up, click on on the Advanced button.
  • In the following window, click on on the Find Now button.
  • Double-click in your username from the Search consequence part.
  • Apply your modifications.
  • Next, checkmark the Replace Owner on Subcontainers and Objects possibility.
  • Apply your modifications and once more right-click on the WindowsApps folder.
  • Select Properties and ensure your consumer account, All Application Packages, and System accounts are assigned full management of the WindowsApps folder.
  • Restart your pc when achieved.

Read: How to carry out WindowsApps Folder Cleanup in Windows 11/10

3] Create a brand new User Account

Create new User Account

If the difficulty is because of a corrupt consumer account, you may restore the corrupt consumer profile and see if the difficulty is resolved. Otherwise, you will want to create a brand new consumer account.

Do the next:

  1. Back up the consumer profile information information on the previous consumer account:

    • Open Folder or File Explorer Options.

    • In the Folder Options dialog, within the View tab, look underneath Advanced settings, and set the next settings:

      • Show hidden information, folders, and drives button must be chosen.
      • Hide extensions for recognized file varieties must be unchecked.
      • Hide protected working system information (Recommended) must be unchecked.
    • In File Explorer, find the C:UsersOld_Useridentify folder, the place C is the drive that Windows is put in on, and Old_Useridentify is the identify of the profile you need to again up.

    • Select and duplicate all the information and folders on this folder, aside from the next information:

      • NtUser.dat
      • NtUser.ini
      • NtUser.log (or if it does not exist, as an alternative exclude the 2 log information known as ntuser.dat.log1 and ntuser.dat.log2)
    • Paste the information to a backup location of your selecting. You can retrieve your previous consumer account profile from this backup location if wanted – however needless to say the information that have been underneath C:Users<Old_Useridentify>AppDataLocalPackages have been possible corrupted, and there could also be different information corrupted as nicely.

  2. Sign out of the previous consumer account. You can switch your information/information to the brand new consumer profile earlier than you delete the previous profile. If all the pieces is working correctly, you may delete the previous account/profile.

4] Reset/Re-register Microsoft Store

For this resolution, you could reset the Microsoft Store utilizing the Settings app or the wsreset.exe command. Remember that once you full this motion, the Windows Store’s cache information will all be deleted. Your sign-in info and any app information shall be completely eliminated out of your system.

To reset Microsoft Store through the Settings app in your Windows 11 system, do the next:

Reset Microsoft Store App - Windows 11

  • Open the Settings app.
  • Click on Apps > Apps & Features.
  • Scroll right down to Microsoft Store on the checklist.
  • Click on the ellipsis (three dots) button.
  • Select Advanced Options.
  • Scroll down and click on Reset.
  • Exit the Settings app when achieved.

To reset Microsoft Store through the Settings app in your Windows 10 system, do the next:

Reset Microsoft Store App - Windows 10

  • Open Settings.
  • Click Apps > Apps and options.
  • Search for or scroll to find Microsoft Store.
  • Next, click on on the entry as soon as to broaden its choices.
  • Now, click on the Advanced choices hyperlink.
  • In the web page that opens, scroll down and click on the Reset button.
  • Exit the Settings app when achieved.

If the reset didn’t assist with the difficulty in view, you may re-register the Microsoft Store app by following these steps:

  • Press the Windows key + X to open the Power User Menu.
  • Tap A on the keyboard to launch PowerShell (Windows Terminal) in admin/elevated mode.
  • In the PowerShell console, copy and paste the command beneath and hit Enter.
Get-AppxPackage -allusers Microsoft.WindowsStore | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)AppXManifest.xml”}
  • Once the command executes, exit Windows Terminal.
  • Restart your pc.

On boot, repeat the motion that triggered the error. If the error persists, strive the following resolution.

5] Reset PC

Reset this PC

If the difficulty persists after you may have exhausted all different recommendations on this submit, then it’s possible the difficulty is brought on by system corruption that has damaged a lot of the Windows set up elements thereby affecting regular app and system performance. In this case, probably the most relevant resolution is to reset Windows 11/10. In the unlikely or possible occasion, the difficulty persists after the PC reset, you may carry out an in-place improve restore.

Read: Fix Package may not be registered on Windows 11/10

Hopefully, this submit helps you!

Also learn: Add-AppxPackage Deployment failed with HRESULT 0x80073CFF

What is AppxManifest?

The package deal.appxmanifest is an XML-style file that builders use to configure the small print of an app, resembling writer info, logos, processor architectures, and so forth. To open an Appxmanifest package deal, you should utilize Microsoft Visual Studio to open the file with the XML (Text) Editor.

How do I repair AppxManifest.XML?

Typically, you could get the appxmanifest.xml errors because of a corrupt or lacking Windows-associated file, generally as a consequence of malware an infection. In this case, acquiring a recent wholesome copy of your XML file will almost definitely resolve the issue.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button