PC & Mobile

Bluescreen after installing Drivers in Windows 11/10

Without gadget drivers, your laptop’s inner or exterior {hardware} (such because the graphics card or arduous drive) gained’t perform correctly. When you join new units to your laptop, Windows can test to see whether or not there are drivers out there. In this submit, we provide ideas that ought to enable you to resolve the problem of a Bluescreen after installing Drivers in Windows 11/10.

Our investigations reveal that the next are the final causes it’s possible you’ll encounter this problem in your laptop:

  • Pending Windows Updates.
  • Overclocked {hardware}.
  • Faulty RAM.
  • Problematic Bandwidth Control Filter driver.
  • System File Corruption.
  • Unverified or unsigned driver.
  • Recent software program change.
  • Partially incompatible GPU drivers.

Fix Bluescreen after installing Drivers on Windows 11/10

Device drivers are important and perform a primary perform that allows a pc to connect with and talk with specific units. The messages and processes by which the pc (OS and purposes) can entry the gadget or problem instructions for the gadget to hold out are outlined by these items of software program. If the right driver isn’t put in, the gadget may not perform in any respect, or it would work with restricted options in some circumstances. So, in the event you get a Bluescreen after installing Drivers in your Windows 11/10 laptop, our ideas outlined under ought to enable you to resolve the problem.

  1. Make positive the driving force is signed
  2. Run Driver Verifier
  3. Run the Blue Screen Troubleshooter
  4. Rollback or set up an earlier model of the driving force
  5. Review the BSOD log information
  6. Run Hardware and Devices Troubleshooter
  7. Stop overclocking
  8. Run Memory Test
  9. Uninstall Bandwidth Control Filter Driver (if relevant)
  10. Troubleshoot in Clean Boot state
  11. Perform System Restore
  12. Reset PC, In-place Upgrade Repair, or Clean Install Windows 11/10

Let’s now briefly talk about the aforementioned ideas. Before you proceed, make sure that Windows is up to date and see if the problem reoccurs. Also, it’s a good suggestion to run the DISM scan, then afterward, run the SFC scan. Both scans will restore any corrupted system file that may doubtlessly trigger Bluescreen errors.

Read: Troubleshoot Windows Blue Screen of Death or Stop Errors

1] Make positive the driving force is signed

Unsigned drivers could cause issues comparable to system crashes and odd habits — you’re much less more likely to encounter driver points in your Windows 11/10 laptop if the drivers are digitally signed by Microsoft. Although driver signing isn’t required on 32-bit variations of Windows, all drivers working on 64-bit variations of Windows have to be signed earlier than Windows will load them. So, it could possibly be the Bluescreen after installing Drivers in your laptop is the symptom of an unsigned driver that Windows is unable to load. In this case, you may simply test if a driver is digitally signed utilizing both the File Signature Verification (SigVerif.exe) or DirectX Diagnostic (DxDiag.exe) software. If the drivers you’ve put in are signed, it’s possible you’ll disable Driver Signature Enforcement and see if that resolves the problem at hand. Otherwise, you may test if an up to date and appropriate driver is out there on the driver OEM web site or through Windows Optional Update.

Read: How to search out which Driver is inflicting the Blue Screen on Windows?

2] Run Driver Verifier

Driver Verifier Manager

As the identify suggests, Driver Verifier is a utility that helps in determining which driver is malfunctioning in your laptop. The utility screens drivers to detect unlawful perform calls or actions that may corrupt the system by subjecting Windows drivers to quite a lot of stresses and checks to search out improper habits.

Since the problem in view may not essentially be the actual driver you put in, however reasonably a battle with one other gadget driver already put in in your system, you may run Driver Verifier which may determine the put in driver(s) inflicting the Bluescreen error in an effort to take the mandatory actions to resolve the problem.

Read: Fix DRIVER VERIFIER DETECTED VIOLATION Blue Screen error

3] Run the Blue Screen Troubleshooter

Online Blue Screen Troubleshooter

Generally, a number of components could cause BSODs on a Windows 11/10 PC which is normally {hardware} points, software program points, and consumer errors. As primary troubleshooting for Bluescreen errors that don’t require technical experience, affected PC customers can run the Blue Screen Online Troubleshooter from Microsoft. This is an automatic wizard designed that can assist you troubleshoot and resolve BSOD by making suggestions on potential options you may apply based mostly in your reply to the query on the way you encountered the error.

Read: Black Screen Troubleshooter will repair Black or Blank display screen errors

4] Rollback or set up an earlier model of the driving force

You can roll again the driving force if after updating the driving force the Bluescreen problem began. You also can obtain and set up an earlier model of a driver if the newer model is triggering a Bluescreen throughout or after the driving force set up. The problem right here could possibly be resulting from compatibility points with a more moderen model/construct of Windows particularly if you already know the driving force labored properly with earlier variations of the Windows OS. In this case, you may run the Program Compatibility Troubleshooter, or you may merely set up the driving force in compatibility mode and see if the Bluescreen problem goes away.

Read: AMD driver retains crashing when taking part in video games on PC

5] Review the BSOD log information

Review the BSOD log files

If you’ve configured Windows to create Crash Dump Files on Blue Screen, when a Bluescreen error happens in your Windows 11/10 laptop, a BSOD log file is generated and saved in Event Viewer. You can discover and assessment the BSOD log file which accommodates a wealth of data to an skilled eye that may level you in the precise steps to take in troubleshooting the problem you’re at present going through. Also, a Bluescreen normally outputs an error code or message which you should use to additional diagnose the issue and apply probably the most appropriate answer to that exact BSOD error. And you should use Windbg to troubleshoot Blue Screen cease errors.

Read: How to open and browse Small Memory Dump (DMP) information

6] Run Hardware and Devices Troubleshooter

Hardware and Devices Troubleshooter

Essentially, a tool driver additionally referred to as a software program driver is a selected type of software program software that enables one {hardware} gadget (comparable to a private laptop) to work together with one other {hardware} gadget (comparable to a printer). So, one of many potential causes it’s possible you’ll encounter Bluescreen after installing a tool driver is that the gadget itself could be defective. To rule out this chance, you may run the Hardware and Devices Troubleshooter. If points are detected, you may apply the really helpful fixes by the troubleshooter which can be to manually replace drivers in your system or change the defective {hardware}.

Read: Code 21, Windows is eradicating this gadget

7] Stop overclocking (if relevant)

If you’ve overclocked your PC CPU or GPU, likelihood is it’s possible you’ll expertise Bluescreen errors at random not simply essentially after you’ve put in a driver. These vital system crashes could possibly be resulting from your system working at unsupported voltages and frequencies which can probably occur in case your GPU frequencies are too excessive, and your voltages can not sustain as a result of your PC can not produce sufficient energy resulting from overclocking.

If this state of affairs applies to you, you will get your system to perform correctly once more by reducing the overclocking frequencies for each your CPU and GPU or stopping or restoring to the unique settings for the overclocked {hardware} relying on the overclocking software program in use. Generally, launch the software program and search for the choice to cease overclocking. Once achieved, restart your laptop. This will enable you to decide whether or not the problem is attributable to overclocking.

Read: How to underclock GPU? Is it protected to take action?

8] Run Memory Test

Advanced Memory Diagnostic with Memtest86+

A identified main contributing issue to most BSOD errors is flawed RAM which may trigger reminiscence leaks and result in critical system crashes. To rule out this chance, you may run a reminiscence take a look at utilizing Windows Memory Diagnostics Tool or ideally run Advanced Memory Diagnostic with Memtest86+ to test the integrity of your RAM stick(s) to make sure this isn’t the perpetrator – if any abnormalities are detected, it’s possible you’ll want to interchange the affected RAM. If you’ve dual-channel RAM put in, take away only one stick at a time or in the event you just lately added a brand new RAM stick, take away it and test if that’s inflicting the error.

Read: Memory Error Code 2000-0122, 2000-0123, or 2000-0251

9] Uninstall Bandwidth Control Filter Driver (if relevant)

This answer applies if in case you have the Qualcomm Atheros Killer community adapter put in in your laptop. The Bandwidth Control Filter Driver’s main objective is to permit customers to limit the quantity of information flowing for every information kind. Unless you’re a developer or QA, you haven’t any use for this driver, and you may simply take away this driver by following the directions in this information to uninstall the Bandwidth Control Filter Driver in the community adapter part in Device Manager.

Read: Network Adapter lacking or not exhibiting

10] Troubleshoot in Clean Boot state

Troubleshoot in Clean Boot state

Device driver conflicts in your Windows 11/10 laptop can doubtlessly set off Bluescreen errors as could possibly be the case right here. So, to resolve the problem, you may troubleshoot in Clean Boot (Hardware) state. This course of, which is distinct from the well-known Software Clean Boot, requires you to disable every bit of {hardware} that isn’t required for a system to perform in Device Manager. To determine the {hardware} or units which might be in all probability the reason for the issue, you then re-enable every gadget separately till you isolate the gadget inflicting the problem after which take the mandatory motion to resolve the problem at hand.

11] Perform System Restore

System Restore

System Restore is a viable answer to BSOD errors particularly if there was a current system replace after which installing drivers began crashing the system. In this case, it could possibly be there are inconsistencies between the driving force model and the brand new OS model/construct. To resolve the problem, you may revert your system to an earlier level in time earlier than the system replace. Alternatively, you may uninstall the replace or test if there may be an out there up to date model of your driver that’s appropriate with the brand new OS construct/model.

Read: Blue Screen after Windows Updates

12] Reset PC, In-place Upgrade Repair, or Clean Install Windows 11/10

You can, in the next order Reset the PC, In-place Upgrade Repair, or Clean Install Windows 11/10 in probably circumstances of BSOD errors attributable to extreme system corruption that can’t be resolved conventionally.

Read: FixWin 11 is the perfect Windows restore software to repair Windows 11

I hope you discover this submit useful sufficient!

Also learn:

  • DRIVER INVALID STACK ACCESS Blue Screen
  • DRIVER_PORTION_MUST_BE_NONPAGED BSOD
  • DRIVER OVERRAN STACK BUFFER, 0x000000f7 error

Can drivers trigger Blue Screen?

Typically, BSODs outcome from driver software program or {hardware} points. Apps that crash typically trigger blue screens of demise in the event that they’re damaged or flawed. Windows creates what’s referred to as a minidump file when a BSOD occurs. To repair Blue Screen attributable to drivers, you may apply the next common options:

  • Remove Any External Device.
  • Remove Any Newly Installed Hardware or Software.
  • Check for any Microsoft Windows Updates.
  • Perform a System Restore.

Can Windows 11 trigger Blue Screen?

While upgrading to Windows 11, a Blue Screen of Death isn’t uncommon. The error happens resulting from a number of causes however usually occurs because of a safety program or software compatibility problem. However, it may well additionally occur due to corruption in the present setup or broken information in the set up media.

Does updating drivers repair Blue Screen?

In some circumstances, replace {hardware} drivers can repair Blue Screen errors in Windows 11/10. Most Blue Screens of Death are {hardware} or driver-related, so up to date drivers might repair the reason for the STOP error. You can test the System and Application logs in Event Viewer for errors or warnings that may present extra clues on the reason for the BSOD. If want be, you may replace your drivers through Device Manager.

What causes drivers to be corrupted?

Corrupted drivers are typically the results of malware in your laptop. Your PC is in hazard, particularly for customers that steadily obtain information from questionable sources. These information may comprise viruses and should intervene along with your drivers, doubtlessly harming a few of your laptop’s elements.

Read: Error 39, Windows can not load the gadget driver; Corrupted or lacking.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button